IntelliJ IDEA 2023.3 Help

Code Style. PHP

Use this page to configure formatting options for PHP files. When you change these settings, the Preview pane shows how this will affect your code.

Set from...

Click this link and choose the language to be used as the base for the current language code style. The list contains two options:

  • Language: choose this option to inherit the coding style settings from another language. Select the source language from the list, that opens. Only the settings that are applicable to the current language are taken. All the other settings are not affected.

  • Predefined code style: choose this option to use the coding standards defined for a specific framework. Select one of the following frameworks from the list:

    • PEAR

    • Zend

    • Symfony2. IntelliJ IDEA supports the official Symfony2 code style for Twig and automatically inserts one space after an opening pair of curvy braces and before a closing pair of curvy braces in Twig templates: {{ some_variable }}.

    • PSR1/PSR-2

    • CodeIgniter

    • Laravel

    • PSR-12. If the PSR-12 code style is set, IntelliJ IDEA will prompt you to automatically enable the PSR-12-related code inspections.

    • Drupal

    • Joomla!

    • WordPress

This link appears in the upper-right corner of the language-specific code style page, when applicable.

Click Reset to discard changes and return to the initial set of code style settings.

Tabs and Indents

Item

Description

Use tab character

  • If this checkbox is selected, tab characters are used:

    • On pressing the Tab key

    • For indentation

    • For code reformatting

  • When the checkbox is cleared, IntelliJ IDEA uses spaces instead of tabs.

Smart tabs

  • If this checkbox is selected, the part of indentation defined by the nesting of code blocks, is made of the tabs and (if necessary) spaces, while the part of indentation defined by the alignment is made only of spaces.

    Code style with Smart Tabs on
  • If this checkbox is cleared, only tabs are used. This means that a group of spaces that fits the specified tab size is automatically replaced with a tab, which may result in breaking fine alignment.

    Code style with Smart Tabs off

The Smart tabs checkbox is available if the Use tab character checkbox is selected.

Tab size

In this field, specify the number of spaces included in a tab.

Indent

In this field, specify the number of spaces to be inserted for each indent level.

Continuation indent

In this field, specify the number of spaces to be inserted between the elements of an array, in expressions, method declarations and method calls.

Keep indents on empty lines

If this checkbox is selected, IntelliJ IDEA will keep indents on the empty lines as if they contained some code.

If this checkbox is cleared, IntelliJ IDEA will delete the tab characters and spaces.

Indent code in PHP tags

Select this checkbox to have the code enclosed in <?php> tags indented against the opening <?php tag.

Spaces

Select or clear the checkboxes to have spaces inserted, not inserted, or removed in various PHP contexts.

Before parentheses

Item

Description

Function declaration parentheses

If selected, a space is inserted before the opening parenthesis in function declarations. Otherwise, no space is inserted.

function foo ($x, $z) {}
function foo($x, $z) {}

Function call parentheses

If selected, a space is inserted before the opening parenthesis in function calls. Otherwise, no space is inserted.

$obj->foo ()->bar ();
$obj->foo()->bar();

Anonymous function parentheses

If selected, a space is inserted before the opening parenthesis in anonymous function declarations. Otherwise, no space is inserted.

$example = function () {};
$example = function() {};

'if' parentheses

If selected, a space is inserted before the opening parenthesis in if constructs. Otherwise, no space is inserted.

if ($x) { echo $x; }
if($x) { echo $x; }

'for' parentheses

If selected, a space is inserted before the opening parenthesis in for loops. Otherwise, no space is inserted.

for ($i = 0; $i < $x; $i++) { $y += $i; }
for($i = 0; $i < $x; $i++) { $y += $i; }

'while' parentheses

If selected, a space is inserted before the opening parenthesis in while loops. Otherwise, no space is inserted.

while ($x != $y) { echo ($x * 2); }
while($x != $y) { echo ($x * 2); }

'switch' parentheses

If selected, a space is inserted before the opening parenthesis in switch statements. Otherwise, no space is inserted.

switch ($i) { case 0: echo "i equals 0"; break; case 1: echo "i equals 1"; break; }
switch($i) { case 0: echo "i equals 0"; break; case 1: echo "i equals 1"; break; }

'catch' parentheses

If selected, a space is inserted before the opening parenthesis in catch constructs. Otherwise, no space is inserted.

try { get($x); } catch (Exception $e) { }
try { get($x); } catch(Exception $e) { }

Array initializer parentheses

If selected, a space is inserted before the opening parenthesis in array declarations. Otherwise, no space is inserted.

$array = array (0 => "zero", 1 => "one");
$array = array(0 => "zero", 1 => "one");

Arrow function parentheses

If selected, a space is inserted before the opening parenthesis in anonymous function declarations. Otherwise, no space is inserted.

$double = fn ($x) => $x * 2;
$double = fn($x) => $x * 2;

Around operators

Item

Description

Assignment operators (=, +=, ...)

If selected, spaces are inserted around assignment operators in assignment expressions. Otherwise, no spaces are inserted.

$var = f($a);
$var=f($a);

Logical operators (&&, ||)

If selected, spaces are inserted around logical operators in logical expressions. Otherwise, no spaces are inserted.

$var = $a && $b;
$var = $a&&$b;

Equality operators (==, =)

If selected, spaces are inserted around equality operators in comparison expressions. Otherwise, no spaces are inserted.

if ($a == $b) {};
if ($a==$b) {};

Relational operators (<, >, <=, >=)

If selected, spaces are inserted around relational operators in comparison expressions. Otherwise, no spaces are inserted.

if ($a > $b) {};
if ($a>$b) {};

Bitwise operators (&, |, ^)

If selected, spaces are inserted around bitwise operators. Otherwise, no spaces are inserted.

$var += ($var ^ 0x123);
$var += ($var^0x123);

Additive operators (+, -)

If selected, spaces are inserted around additive operators. Otherwise, no spaces are inserted.

$var = $a + $b;
$var = $a+$b;

Multiplicative operators (*, /, %, **)

If selected, spaces are inserted around multiplicative operators. Otherwise, no spaces are inserted.

$var = $a * $b;
$var = $a*$b;

Shift operators (<<, >>, >>>)

If selected, spaces are inserted around bit shifting operators. Otherwise, no spaces are inserted.

$var = $a << 1;
$var = $a<<1;

Unary additive operators (+,-,++,--)

If selected, spaces are inserted around unary additive operators. Otherwise, no spaces are inserted.

for ($i = 0; $i < $x; $i ++) {}
for ($i = 0; $i < $x; $i++) {}

Concatenation (.)

If selected, spaces are inserted around the . concatenation operator. Otherwise, no spaces are inserted.

echo "The result is " . $i;
echo "The result is ".$i;

Object access operator (->)

If selected, spaces are inserted around the -> object access operator. Otherwise, no spaces are inserted.

$obj -> foo() -> bar();
$obj->foo()->bar();

Null coalescing operator (??)

If selected, spaces are inserted around the ?? null coalescing operator. Otherwise, no spaces are inserted.

foo() ?? bar();
foo()??bar();

Assignment in declare statement

If selected, spaces are inserted around the assignment operator in the declare statement. Otherwise, no spaces are inserted.

declare(strict_types = 1);
declare(strict_types=1);

Before left brace

Item

Description

Class left brace

If selected, a space is inserted between the class name and the opening brace in class declarations. Otherwise, no space is inserted.

class Class1 { function Foo() {} }
class Class1{ function Foo() {} }

Selecting or clearing the checkbox is relevant only when Braces placement for In class declaration is set to End of line on the Wrapping and Braces tab.

Function left brace

If selected, a space is inserted between the function parameters' list closing parenthesis and the opening brace in function declarations. Otherwise, no space is inserted.

function foo() {}
function foo(){}

Selecting or clearing the checkbox is relevant only when Braces placement for In function declaration is set to End of line on the Wrapping and Braces tab.

'if' left brace

If selected, a space is inserted between the conditional expression's closing parenthesis and the opening brace in if statements. Otherwise, no space is inserted.

if ($x) { echo $x; }
if ($x){ echo $x; }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'else' left brace

If selected, a space is inserted between the else keyword and the opening brace in if-else statements. Otherwise, no space is inserted.

if ($x) { echo $x; } else { echo $y; }
if ($x) { echo $x; } else{ echo $y; }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'for' left brace

If selected, a space is inserted between the conditional expression's closing parenthesis and the opening brace in for loops. Otherwise, no space is inserted.

for ($i = 0; $i < $y; $i++) { $str = $arr[$i]; }
for ($i = 0; $i < $y; $i++){ $str = $arr[$i]; }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'while' left brace

If selected, a space is inserted between the conditional expression's closing parenthesis and the opening brace in while loops. Otherwise, no space is inserted.

while ($var != $x) { $var++; }
while ($var != $x){ $var++; }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'do' left brace

If selected, a space is inserted between the do keyword and the opening brace in do-while loops. Otherwise, no space is inserted.

do { echo $var; } while ($var > 0);
do{ echo $var; } while ($var > 0);

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'switch' left brace

If selected, a space is inserted between the conditional expression's closing parenthesis and the opening brace in switch statements. Otherwise, no space is inserted.

switch ($i) { case 0: $var = 'zero'; break; default: $var = 'other'; }
switch ($i){ case 0: $var = 'zero'; break; default: $var = 'other'; }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'try' left brace

If selected, a space is inserted between the try keyword and the opening brace in try blocks. Otherwise, no space is inserted.

try { get($x); } catch (Exception $e) { }
try{ get($x); } catch (Exception $e) { }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'catch' left brace

If selected, a space is inserted between the catch statement argument list and the opening brace in catch blocks. Otherwise, no space is inserted.

try { get($x); } catch (Exception $e) { }
try{ get($x); } catch (Exception $e){ }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

'finally' left brace

If selected, a space is inserted between the finally keyword and the opening brace in finally blocks. Otherwise, no space is inserted.

try { get($x); } catch (Exception $e) { } finally { }
try { get($x); } catch (Exception $e) { } finally{ }

Selecting or clearing the checkbox is relevant only when Braces placement for Other is set to End of line on the Wrapping and Braces tab.

Before keywords

Item

Description

'else' keyword

If selected, a space is inserted between the closing brace of an if block and an else/elseif keyword. Otherwise, no space is inserted.

if ($x) { echo $x; } else { echo $y; }
if ($x) { echo $x; }else { echo $y; }

'while' keyword

If selected, a space is inserted between the closing brace of a do block and the while keyword in do-while loops. Otherwise, no space is inserted.

do { echo $var; } while ($var > 0);
do { echo $var; }while ($var > 0);

'catch' keyword

If selected, a space is inserted between the closing brace of a try block and the catch keyword. Otherwise, no space is inserted.

try { get($x); } catch (Exception $e) { }
try{ get($x); }catch (Exception $e){ }

'finally' keyword

If selected, a space is inserted between the closing brace of a catch block and the finally keyword. Otherwise, no space is inserted.

try { get($x); } catch (Exception $e) { } finally { }
try { get($x); } catch (Exception $e) { }finally { }

Within

Item

Description

Brackets

If selected, spaces within brackets are always inserted. Otherwise, spaces are never inserted.

Brackets around variable/expression

If selected, IntelliJ IDEA inserts spaces inside brackets during reformatting only if the brackets enclose a variable or an expression. This setting affects reformatting only if you have not configured force insertion of spaces inside brackets by selecting the Brackets checkbox under the Within node in the Spaces tab.

This option helps you keep your code in accordance with the WordPress PHP Coding Standards.

If the checkbox is cleared, the spaces insertion policy depends on the Brackets setting regardless of the type of content inside brackets.

Array initializer parentheses

If selected, spaces inside parentheses in array initializer expressions are always inserted. Otherwise, no spaces are inserted.

$array = array( 0 => "zero", 1 => "one" );
$array = array(0 => "zero", 1 => "one");

Grouping parentheses

If selected, spaces inside grouping parentheses in complex expressions are always inserted. Otherwise, no spaces are inserted.

$var += ( $var ^ 0x123 ) << 2;
$var += ($var ^ 0x123) << 2;

Function declaration parentheses

If selected, spaces inside parentheses in function declarations are always inserted. Otherwise, no spaces are inserted.

function foo( $x, $z ) {}
function foo($x, $z) {}

Function call parentheses

If selected, spaces inside parentheses in function calls are always inserted. Otherwise, no spaces are inserted.

foo( $x, $z );
foo($x, $z) {};

'if' parentheses

If selected, spaces inside parentheses in if statements are always inserted. Otherwise, no spaces are inserted.

if ( $x ) { echo $x; }
if ($x) { echo $x; }

'for' parentheses

If selected, spaces inside parentheses in for loops are always inserted. Otherwise, no spaces are inserted.

for ( $i = 0; $i < $x; $i++ ) { $y += $i; }
for ($i = 0; $i < $x; $i++) { $y += $i; }

'while' parentheses

If selected, spaces inside parentheses in while loops are always inserted. Otherwise, no spaces are inserted.

while ( $x != $y ) { echo ($x * 2); }
while ($x != $y) { echo ($x * 2); }

'switch' parentheses

If selected, spaces inside parentheses in switch statements are always inserted. Otherwise, no spaces are inserted.

switch ( $i ) { default: echo "i equals 0"; break; }
switch($i) { default: echo "i equals 0"; break; }

'catch' parentheses

If selected, spaces inside parentheses in catch constructs are always inserted. Otherwise, no spaces are inserted.

try { get($x); } catch ( Exception $e ) { }
try { get($x); } catch (Exception $e) { }

<?= and ?>

If selected, spaces inside the opening and closing PHP tags (<?= and ?>) are always inserted. Otherwise, no spaces are inserted.

<div><?= echo foo(); ?></div>
<div><?=echo foo();?></div>

In ternary operator (?:)

Item

Description

Before '?'

After '?'

Before ':'

After ':'

Between '?' and ':'

Select the checkboxes in this section to have spaces automatically inserted around ?, around :, and between ? and : in ternary (conditional) operators.

For example, if Before '?' and After ':' are selected, IntelliJ IDEA automatically inserts spaces before ? and after : in ternary conditional expressions. Otherwise, no spaces are inserted.

$var = $x > 0 ?1: 2;
$var = $x > 0?1:2;

Other

Item

Description

Before comma/After comma

If selected, spaces are automatically inserted before/after commas in parameter lists, argument lists, array declarations, and so on. Otherwise, no spaces are inserted.

function foo ($x , $z) {}
function foo ($x,$z) {}

Before 'for' semicolon/After 'for' semicolon

If selected, spaces are automatically inserted before/after semicolons in for loops. Otherwise, no spaces are inserted.

for($i = 0 ; $i < $x ; $i++) { $y += $i; }
for($i = 0;$i < $x;$i++) { $y += $i; }

After type cast

If selected, a space is automatically inserted after the closing parenthesis of a cast. Otherwise, no space is inserted and the casted variable sticks to the cast.

$fst = (string) $foo;
$fst = (string)$foo;

Before colon in return type/After colon in return type

If selected, spaces are automatically inserted before/after colons in function return type declarations. Otherwise, no spaces are inserted.

function foo() : int {}
function foo():int {}

Around | in union type

If selected, spaces are automatically inserted around the pipe symbol | in union types' declarations. Otherwise, no spaces are inserted.

function returnNumber ( int | float $number) : int | float {}
function returnNumber ( int|float $number) : int|float {}

Before colon in named argument/After colon in named argument

If selected, spaces are automatically inserted before/after colons in named arguments. Otherwise, no spaces are inserted.

foo(start : $a, end : $b);
foo(start:$a, end:$b);

Before colon next to type declaration in backed enum/After colon next to type declaration in backed enum

If selected, spaces are automatically inserted before/after colons in backed enums' type declarations. Otherwise, no spaces are inserted.

enum Suit : string { case Hearts = 'H'; case Diamonds = 'D'; case Clubs = 'C'; case Spades = 'S'; }
enum Suit:string { case Hearts = 'H'; case Diamonds = 'D'; case Clubs = 'C'; case Spades = 'S'; }

Before unary Not (!)/After unary Not (!)

If selected, spaces are automatically inserted before/after unary Not ! operators. Otherwise, no spaces are inserted.

if ( ! 0 > $x && ! $x < 10) {}
if (!0 > $x && !$x < 10) {}

Wrapping and Braces

Common options

Item

Description

Hard wrap at

Use this field to specify a margin space required on the right side of an element. If you select the Default option, then a value of the right margin from the global settings is used.

Wrap on typing

Use these settings to specify how the edited text is fitted in the specified Hard wrap at:

  • Default: in this case IntelliJ IDEA uses the Wrap on typing option that is specified in the global settings.

  • Yes: in this case IntelliJ IDEA uses the value specified in the Right Margin field.

  • No: in this case this option is switched off and a line can exceed the value specified in the right margin.

Visual guides

Use this field to specify multiple right margins. You can leave a default value or enter the number of spaces for your margin. If you want to specify several margins, enter numbers separated by comma.

Keep when reformatting

Use these settings to configure exceptions that IntelliJ IDEA will make when reformatting the source code.

Item

Description

Line breaks

If selected, line breaks will be kept after reformatting the code. Otherwise, the lines that are shorter than a standard convention will be merged into one line.

Comment at first column

If selected, comments placed at the first column won't change their position after reformatting the code. Otherwise, such comments will align with the next line of code.

Control statement in one line

If selected, control statements will be placed in line after reformatting the code. Otherwise, they will be placed on multiple lines.

if (true) $x = 10; elseif ($y < 10) $x = 5; else if (true) $x = 5;
if (true) $x = 10; elseif ($y < 10) $x = 5; else if (true) $x = 5;

Simple methods in one line

If selected, simple methods will be kept in line after reformatting the code. Otherwise, they will expand into multiple lines.

class Foo() { public function bar() { } }
class Foo() { public function bar() { } }

Simple classes in one line

If selected, simple classes will be kept in line after reformatting the code. Otherwise, they will expand into multiple lines.

class Foo() { }
class Foo() { }

Braces placement

In this section, choose the position for opening braces in declarations of namespaces, classes, and functions, in loops, and in other constructs.

Item

Description

End of line

If selected, the opening brace is placed at the declaration line end.

Next line if wrapped

If selected, the opening brace is placed at the beginning of the line after the multiline declaration line.

Next line

If selected, the opening brace is placed at the beginning of the line after the declaration line.

Next line shifted

If selected, the opening brace is placed at the line after the declaration line being shifted to the corresponding indent level.

Next line, each shifted

If selected, the opening brace is placed at the line after the declaration line being shifted to the corresponding indent level, and have the next line shifted to the next indent level as well.

Extends/implements list

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

If selected, each item in an extends or an implements list, which after wrapping starts on a new line, is aligned by the first item, which remains unwrapped.

When the checkbox is cleared, the position of each item in a wrapped list is determined by the chosen indentation level.

The status of the checkbox affects the formatting only if you have chosen to wrap lists, if the Do not wrap option is chosen, selecting or clearing the checkbox has no effect.

class Foo extends Class1 implements Class2, Class3, Class4 { }
class Foo extends Class1 implements Class2, Class3, Class4 { }

Extends/implements keyword

In this section, configure wrapping for the extends and implements keywords in class declarations.

If you select Do not wrap, no wrapping will be applied; if you select Wrap if long or Wrap always, each keyword and each item in an extends or implements list will be displayed on a new line.

abstract class Foo extends Class1 implements Class2, Class3 { }
abstract class Foo extends Class1 implements Class2, Class3 { }

Function declaration parameters

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

If selected, each parameter in the parameter list which after wrapping starts on a new line, is aligned by the first parameter, which remains unwrapped.

When the checkbox is cleared, the position of each item in a wrapped list is determined by the chosen indentation level.

The status of the checkbox affects the formatting only if you have chosen to wrap lists, if the Do not wrap option is chosen, selecting or clearing the checkbox has no effect.

function bar($x, $y, int $z = 1) {}
function bar($x, $y, int $z = 1) {}

New line after '('

If selected, parameters in function/method declarations are displayed on a new line after the opening parenthesis. Otherwise, they are displayed on the same line.

When the checkbox is cleared, the position of each item in a wrapped list is determined by the chosen indentation level.

The status of the checkbox affects the formatting only if you have chosen to wrap lists, if the Do not wrap option is chosen, selecting or clearing the checkbox has no effect.

function bar( $x, $y, int) {}
function bar($x, $y, $z) {}

Place ')' on new line

If selected, the closing parenthesis in a function/method declaration is placed on a new line. Otherwise, it is displayed on the same line with the last parameter.

function bar( $x, $y, int ) {}
function bar( $x, $y, int) {}

Keep ')' and '{' on one line

If selected, the opening curly brace is displayed on the same line as the function parameters. Otherwise, the opening curly brace is moved to the next line.

function Foo() { }
function Foo() { }

Function/constructor call arguments

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

If selected, each argument in a function call which after wrapping starts on a new line, is aligned by the first argument, which remains unwrapped.

When the checkbox is cleared, the position of each item in a wrapped list is determined by the chosen indentation level.

The status of the checkbox affects the formatting only if you have chosen to wrap lists, if the Do not wrap option is chosen, selecting or clearing the checkbox has no effect.

$result = foo("arg1", "arg2", true);
$result = foo("arg1", "arg2", true);

New line after '('

If selected, arguments in function calls are displayed on a new line after the opening parenthesis. Otherwise, they are displayed on the same line.

$result = foo("arg1", "arg2", true);
$result = foo( "arg1", "arg2", true);

Place ')' on new line

If selected, the closing parenthesis in a function call is placed on a new line. Otherwise, it is displayed on the same line with the last argument.

$result = foo("arg1", "arg2", true );
$result = foo("arg1", "arg2", true);

Place '()' for constructor

Choose whether IntelliJ IDEA should automatically add braces in construct statements without parameters during reformatting the code.

  • As is: existing braces are preserved and no new ones are added.

  • Always: braces are always added.

  • Never: braces are always removed.

$var = new ExampleClass();
$var = new ExampleClass;

Align named arguments

If selected, named arguments in a function call are aligned against the rightmost one. Otherwise, they are aligned according to the indentation settings.

foo( start : $a, end : $b );
foo( start : $a, end : $b );

Chained method calls

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

If selected, each called method, which after wrapping is positioned on a new line, is aligned by the first one, which remains unwrapped.

When the checkbox is cleared, the position of each item in a wrapped list is determined by the chosen indentation level.

The status of the checkbox affects the formatting only if you have chosen to wrap lists, if the Do not wrap option is chosen, selecting or clearing the checkbox has no effect.

$x = $x->one( "a", "b" ) ->two( "c", "d", "e" ) ->three( "fg" ) ->four();
$x = $x->one( "a", "b" ) ->two( "c", "d", "e" ) ->three( "fg" ) ->four();

Place ';' on new line

If selected, the semicolon ; is moved to a new line after the last item in a chained call. Otherwise, it is displayed on the same line.

$x = $x->one( "a", "b" ) ->two( "c", "d", "e" ) ->three( "fg" ) ->four() ;
$x = $x->one( "a", "b" ) ->two( "c", "d", "e" ) ->three( "fg" ) ->four();

'if()' statement

Item

Description

New line after '('

If selected, conditional expressions are moved to the next line after the opening parenthesis in if statements. Otherwise, they stay on the same line.

if ( $var == "one") { }
if ($var == "one") { }

Place ')' on new line

If selected, closing braces of conditional expressions in if statements are moved to the next line. Otherwise, they stay on the same line.

if ($var == "one" ) { }
if ($var == "one") { }

Force braces

Choose the braces introduction method for if statements:

  • Do not force: select this option to suppress introducing braces automatically.

  • When multiline: select this option to have braces introduced automatically if a statement occupies more than one line. Note that IntelliJ IDEA analyzes the number of lines in the entire statement but not only its condition.

    IntelliJ IDEA will insert braces automatically:

  • Always: select this checkbox to have braces always introduced automatically.

'else' on new line

If selected, the else keyword is moved to a new line in if-else statements. Otherwise, it stays on the same line with a preceding statement.

if ($var == "one") { } else $var = true;
if ($var == "one") { } else $var = true;

Special 'else if' treatment

If selected, else if constructs are treated specially and not split during reformatting. Otherwise, they are split into a nested else-if structure.

The status of the checkbox affects formatting only if you have chosen to force braces in if statements. If the Do not force option is selected, the Special 'else if' treatment checkbox has no effect.

if (true) $x = 10; else if ($y < 10) $x = 5; else $x = 0;
if (true) { $x = 10; } else { if ($y < 10) { $x = 5; } else $x = 0;

for()/foreach() statements

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

When the checkbox is selected and the New line after '(' checkbox is cleared, each item in a for/foreach loop expression, which after wrapping starts on a new line, is aligned by the first item, which remains unwrapped.

for ($i = 0; $i < $x; $i++) { $y += $i; }
for ($i = 0; $i < $x; $i++) { $y += $i; }

New line after '('

If selected, expressions in for/foreach loops are displayed on the next line after the opening parenthesis. Otherwise, they are displayed on the same line.

for ( $i = 0; $i < $a; $i++) { $y += $i; }
for ($i = 0; $i < $a; $i++) { $y += $i; }

Place ')' on new line

If selected, closing braces in for/foreach loops are displayed on the next line after the expression. Otherwise, they are displayed on the same line.

for ( $i = 0; $i < $a; $i++ ) { $y += $i; }
for ($i = 0; $i < $a; $i++) { $y += $i; }

Force braces

Choose the braces introduction method for for/foreach loops:

  • Do not force: select this option to suppress introducing braces automatically.

  • When multiline: select this option to have braces introduced automatically if a statement occupies more than one line. Note that IntelliJ IDEA analyzes the number of lines in the entire statement but not only its condition.

    IntelliJ IDEA will insert braces automatically:

  • Always: select this checkbox to have braces always introduced automatically.

'while()' statement

Item

Description

Force braces

Choose the braces introduction method for while loops:

  • Do not force: select this option to suppress introducing braces automatically.

  • When multiline: select this option to have braces introduced automatically if a statement occupies more than one line. Note that IntelliJ IDEA analyzes the number of lines in the entire statement but not only its condition.

    IntelliJ IDEA will insert braces automatically:

  • Always: select this checkbox to have braces always introduced automatically.

'do ... while()' statement

Item

Description

Force braces

Choose the braces introduction method for do-while loops:

  • Do not force: select this option to suppress introducing braces automatically.

  • When multiline: select this option to have braces introduced automatically if a statement occupies more than one line. Note that IntelliJ IDEA analyzes the number of lines in the entire statement but not only its condition.

    IntelliJ IDEA will insert braces automatically:

  • Always: select this checkbox to have braces always introduced automatically.

'while' on new line

If selected, the while keyword is moved to the next line after a do block in do-while loops. Otherwise, it stays on the same line.

do { echo $var; } while ($var > 0);
do{ echo $var; } while ($var > 0);

'switch' statement

Item

Description

Indent 'case' branches

If selected, case statements are indented relative to the switch statement. Otherwise, they are placed at the same indent level.

switch ($i) { case 0: echo "i equals 0"; break; case 1: echo "i equals 1"; break; }
switch ($i) { case 0: echo "i equals 0"; break; case 1: echo "i equals 1"; break; }

Indent 'break' from 'case'

If selected, break statements are indented relative to case statements. Otherwise, they are placed at the same indent level.

switch ($i) { case 0: echo "i equals 0"; break; case 1: echo "i equals 1"; break; }
switch ($i) { case 0: echo "i equals 0"; break; case 1: echo "i equals 1"; break; }

'try' statement

Item

Description

'catch' on new line

If selected, catch statements are placed on the next line after the closing brace of a try block. Otherwise, they are placed on the same line.

try { get($x); } catch (Exception $e) { }
try { get($x); } catch (Exception $e) { }

'finally' on new line

If selected, finally statements are placed on the next line after the closing brace of a catch block. Otherwise, they are placed on the same line.

try { get($x); } catch (Exception $e) { } finally { }
try { get($x); } catch (Exception $e) { } finally { }

Binary expressions

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

If selected, each operand in a binary operation, which after wrapping starts on a new line, is aligned by the first item, which remains unwrapped. Otherwise, operands are indented according to the indentation settings.

function foo($a, $b, $c) { return $a + $b + $c; }
function foo($a, $b, $c) { return $a + $b + $c; }

Operation sign on next line

If selected, operators in binary operations are moved to the next line together with the wrapped right operand. Otherwise, operators stay on the previous line together with the left operand.

function foo($a, $b, $c) { return $a + $b + $c; }
function foo($a, $b, $c) { return $a + $b + $c; }

New line after '('

If selected, a new line is added after the opening parenthesis and the binary expression is moved to this line. Otherwise, an expression stays on the same line with the opening parenthesis.

$a = $b + ( $c + $d);
$a = $b + ($c + $d);

Place ')' on new line

If selected, a closing parenthesis is moved to a new line after the binary expression. Otherwise, the parenthesis stays on the same line with the expression.

$a = $b + ($c + $d );
$a = $b + ($c + $d);

Assignment statement

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Assignment sign on next line

If selected, assignment signs in assignment statements are moved to the next line together with the wrapped right operand. Otherwise, operators stay on the previous line together with the left operand.

var $numbers = array("one", "two", "three");
var $numbers = array("one", "two", "three");

Align consecutive assignments

If selected, the assignment signs in consecutive assignment statements are aligned by the rightmost one. Otherwise, no alignment is applied.

$y = foo( $x ); $i = foo( $i ); $result = $result . $y . $i;
$y = foo( $x ); $i = foo( $i ); $result = $result . $y . $i;

Class property/constant groups

Item

Description

Align properties in columns

If selected, class properties' declarations are aligned by the rightmost one. Otherwise, no alignment is applied.

class Foo { public $a; protected $b; private $c }
class Foo { public $a; protected $b; private $c }

Align constants

If selected, grouped constants' declarations are aligned by the rightmost one. Otherwise, no alignment is applied.

class Foo { const ONE = 1; const TWO = 2; const THREE = 3; }
class Foo { const ONE = 1; const TWO = 2; const THREE = 3; }

Align enum cases

If selected, assigned values in backed enumerations are aligned by the rightmost one. Otherwise, no alignment is applied.

enum Suit: string { case Clubs = '♣'; case Diamonds = '♦'; case Hearts = '♥'; case Spades = '♠'; }
enum Suit: string { case Clubs = '♣'; case Diamonds = '♦'; case Hearts = '♥'; case Spades = '♠'; }

Ternary operation

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

'?' and ':' signs on next line

If selected, the ? and : symbols are moved to the next line together with the wrapped right operand. Otherwise, they stay on the previous line together with the left operand.

echo ($result == 42) ? "Passed" : " Failed";
echo ($result == 42) ? "Passed" : " Failed";

Array initializer

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Align when multiline

If selected, each array element, which after wrapping is positioned on a new line, is aligned by the first one, which remains unwrapped. Otherwise, all the elements are aligned according to the indentation settings.

$arr = [0.1, 0.2, 0.3, 0.4 ];
$arr = [0.1, 0.2, 0.3, 0.4 ];

Selecting or clearing the Align when multiline checkbox affects formatting only if you have chosen to wrap lists. If the Do not wrap option is chosen, the status of the checkboxes has no effect.

Align key-value pairs

If selected, all key-value array elements are aligned against the rightmost assignment operator =>. Otherwise, all the elements are aligned according to the indentation settings.

$arr = [0 => "value 1", 1234 => "value 2", 56 => "value 3" ];
$arr = [0 => "value 1", 1234 => "value 2", 56 => "value 3" ];

New line after '('

If selected, the first element of the array is displayed on a new line and all the elements of the array are aligned according to the indentation settings, regardless of the status of the Align when multiline checkbox. Otherwise, the first element of the array remains on the same line, and the other elements are aligned according to the indentation settings.

$arr = [ "value 1", "value 2", "value 3" ];
$arr = ["value 1", "value 2", "value 3" ];

Place ')' on new line

If selected, the closing parenthesis is displayed on a separate line. Otherwise, it remains on the same line together with the last element of the array.

$arr = ["value 1", "value 2", "value 3" ];
$arr = ["value 1", "value 2", "value 3"];

Modifier list

Item

Description

Wrap after modifier list

If selected, the code is wrapped after a list of visibility modifiers. Otherwise, no wrapping is performed.

protected function Foo() { }
protected function Foo() { }

Function return type

Item

Description

Return type on new line

If selected, functions' return type declarations are placed on the next line. Otherwise, they stay on the same line.

function foo() : int { }
function foo() : int { }

Comments

Item

Description

Align inline comments

If selected, inline comments located on consecutive lines are aligned by the rightmost comment.

echo "one"; //one echo "two"; //two echo "three"; //three
echo "one"; //one echo "two"; //two echo "three"; //three

PHP opening tag

Item

Description

New line after '<?php' tag

If selected, the code is moved to the next line after the opening <?php tag. Otherwise, it stays on the same line.

<?php echo "Message";
<?php echo "Message";

'match' expression

Item

Description

Align 'match' arm bodies

If selected, all expressions in match arms are aligned against the rightmost operator =>. Otherwise, the expressions are aligned according to the indentation settings.

match ($i) { 0 => 'zero', 42 => 'forty-two', default => 'none' };
match ($i) { 0 => 'zero', 42 => 'forty-two', default => 'none' };

Group 'use'

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

  • Chop down if long: select this option to have elements in lists that go beyond the right margin wrapped, so that there is one element per line with proper indentation.

Attributes

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

Attributes for parameters

Item

Description

Common wrapping options

  • Do not wrap: when this option is selected, no special wrapping style is applied.

    With this option selected, the nested alignment and braces settings are ignored.

  • Wrap if long: select this option to have lines going beyond the right margin wrapped with proper indentation.

  • Wrap always: select this option to have all elements in lists wrapped, so that there is one element per line with proper indentation.

Blank lines

Use this tab to define where and how many blank lines you want IntelliJ IDEA to retain and insert in your code after reformatting. For each type of location, specify the number of blank lines to be inserted. The results are displayed in the preview pane.

Item

Description

Keep maximum blank lines

In this area, specify the number of blank lines to be kept after reformatting in the specified locations.

Minimum blank lines

In this area, specify the number of blank lines to be present in the specified locations.

PHPDoc

In this tab, configure the code style to be applied inside PHPDoc comments. Learn more about documenting PHP code at PHPDoc comments.

Item

Description

Keep blank lines

Select this checkbox to suppress removing blank lines automatically.

Blank line before the first tag

Select this checkbox to have a blank line inserted above the first PHPDoc tag.

Blank lines around parameters

Select this checkbox to have a blank line inserted above and below the section with @param tags.

Wrap long lines

Select this checkbox to have the text that exceeds the right margin wrapped to the next line.

Align parameter/property names

Select this checkbox to have the $<paramname> elements aligned.

Align tag comments

Select this checkbox to have the description elements aligned.

PHPDoc '@param' spaces

In this area, set the number of spaces for separating the @param tag elements.

Generated PHPDoc tags

In this area, configure the code style to be applied within generated PHP documentation blocks, refer to PHPDoc comments.

  • Use fully-qualified class names: select this checkbox to have IntelliJ IDEA specify fully qualified class names for properties, function parameters, return and throws values, and so on.

  • Place ‘null’ in types: select this checkbox to have product generate annotations for nullable parameters and return types and choose where the null indication should be placed (that is, string|null or null|string).

Sort PHPDoc tags

Select this checkbox to have the PHPDoc tags automatically sorted in the defined order when you generate a PHPDoc block for a code construct.

  • Use the Add button and the Remove button to add or remove the PHPDoc tag entries from the list.

  • Use the Up button and the Down button to arrange the PHPDoc tag entries order.

Code Conversion

In this tab, configure the code style to be applied when performing automatic code conversion.

Item

Description

Convert True/False constants to

Select the desired option to have the true and false constants displayed either in the upper or the lower case.

Convert Null constant to

Select the desired option to have the null constants displayed either in the upper or the lower case.

Convert else if/elseif to

Select the desired option to have else if and elseif constants displayed uniformly as else if or elseif.

Sort 'use' statements

Select the desired option to have the use statements sorted either alphabetically or by length when you optimize imports.

Add a comma after last parameter in parameter list

Select this checkbox to have a trailing comma inserted after the last parameter in parameter lists. Allowed by the syntax in PHP 8.0 and later.

Add a comma after last variable in closure use list

Select this checkbox to have a trailing comma inserted after the last variable in closure use lists. Allowed by the syntax in PHP 8.0 and later.

Add a comma after last argument in function call

Select this checkbox to have a trailing comma inserted after the last argument in function calls.

Add a comma after last match arm

Select this checkbox to have a trailing comma inserted after the last arm in match expressions.

Array/List Declaration Style

  • Force short declaration style: select this checkbox to have IntelliJ IDEA replace the array() constructs with [] in array declarations during reformatting.

    When the checkbox is cleared, the traditional literal style in array declarations is preserved after reformatting.

  • Add a comma after last element in multiline array: select this checkbox to have IntelliJ IDEA automatically insert a comma after the last item in declarations of multiline arrays to meet the required coding standard, for example, the Symfony coding standards.

For more information, refer to Arrays. Syntax.

Code Generation

In this tab, configure the code style to be applied when performing certain code generation and refactoring procedures.

Item

Description

Variable Naming Style

Select the desired option to have the generated variables displayed uniformly in Mixed case, camelCase, or snake_case.

Properties Default Visibility

Select the desired option to automatically prefix the generated class properties with private, protected, or public visibility modifiers.

The selected option will correspondingly affect the behavior of the Extract field refactoring, the Change signature refactoring invoked on a class constructor, and the Initialize fields intention action.

Getters/Setters style

In this area, use the provided options to customize the generated getters and setters:

  • Getters/Setters order: Choose, which constructs have to come first – getters or setters.

  • Naming style: Choose the naming scheme, that is camelCase or snake_case, for the generated getters or setters.

Comment Code

In this area, configure the code style options to be applied to comments.

  • Line comment at first column: select this checkbox to have line comments start at the first column, without any indentation. Note that no extra blank spaces are added after the line comment characters. The checkbox is by default selected.

    When the checkbox is cleared, the line comments start from the minimum indentation within the selected code block to be commented.

  • Add a space at line comment start: select this checkbox to have a space is inserted between a line comment character and the first character of a commented line.

Arrangement

In this tab, define a set of rules to rearrange your PHP code according to your preferences.

Item

Description

Grouping Rules

Use this area to set the grouping rules.

  • Keep getters and setters together

    Select this checkbox to keep getter and setter methods together. By default, this checkbox is selected.

  • Keep overridden methods together

    Select this checkbox to group the overridden methods together by class and interface. In order list, select keep order or order by name options.

  • Keep dependent methods together

    Select this checkbox to group the dependent methods together. In the order list, select depth-first order or breadth-first order options. The former will arrange the methods according to the nesting hierarchy; the latter will group together the sibling methods from the same nesting level.

    class foo { public function parent() { $this->child1(); $this->child2(); } private function child1() { $this->nested1(); } private function nested1() { $this->nested2(); } private function nested2() { } private function child2() { } }
    class foo { public function parent() { $this->child1(); $this->child2(); } private function child1() { $this->nested1(); } private function child2() { } private function nested1() { $this->nested2(); } private function nested2() { } }

Matching rules

Use this area to define elements order as a list of rules, where every rule has a set of matches such as modifier or type.

  • the Add button: use this button to add a rule. The empty rule area opens.

  • the Add Section Rule button: use this button to add a section rule. The section rule lets you move methods or variables into sections that you have defined.

    For example, you can create the following section rule:

    A matching rule

    After the arrangement, methods in the class will be rearranged as specified in the created section rule and will be surrounded by comments:

    //methods start public function test() {} private function a() { return 1; } static function r() {} //methods end
  • the Remove button: use this button to remove the rule from the list.

  • the Edit button: use this button to edit an existing rule. To see this button, navigate to the rule that you want to edit and click the button. In popup that opens, modify the rule fields.

  • the Move up button the Move down button: use these buttons to move the selected rule up or down.

Empty rule

Use this area to create a new matching rule or edit an existing one. You can select from the following filters:

  • Type: use this filter to choose classes or methods for your rule.

    Note that clicking a type keyword twice negates the condition.

  • Modifier: use this filter to select the types of modifiers for the rule.

    Note that clicking a modifier keyword twice negates the condition.

  • Name: use this field to specify entry names in the rule. This filter matches only entry names, such as field names, method names, class names, and so on. The filter supports regular expressions and uses a standard syntax. The match is performed against the entire name.

  • Order: use this list to select the sorting order for the rule. This option is useful when more than one element uses the same matching rule. In this case, selecting Keep order will keep the same order as was set before the rearrangement and selecting Order by Name will sort the elements with the same matching rule by their names.

  • Aliases: this option displays aliases that were defined in the Rules Alias Definition dialog. You can remove the ones you do not need.

the Sort Alphabetically button

This icon appears when you select Order by Name from the Order list. The icon indicates that the items in this rule are sorted alphabetically.

Last modified: 11 February 2024